Spray hose is commonly used for leaf vegetables that have relatively shallow roots and are suitable for overhead irrigation.

It has advantages of spraying wide area in short time and less cost for installation.

Considering thin wall thickness of most spray hoses, pressure should not be over manufacturer’s working pressure (usually 0.3 ~ 0.5 bar).

Special attention is required during installation so that the hoses are not scratched or twisted.

Item No. Flow Rate Spray From Flat width Diameter Wall Thickness Roll Length Optimal pressure Bursting pressure
SML 6 – 6 18 L/min & 10 m 6 cm 38 mm 0.22 mm 200 m 0.5 bar 0.9 bar
SML 6 – 3 10 L/min & 10 m 6 cm  38 mm 0.20 mm 200 m 0.3 bar 0.9 bar
SMH 6 – 3 8 L/min & 10 m 6 cm 38 mm 0.20 mm 200 m 0.3 bar 0.9 bar